The swimming pool screen system is much more tough to be built in view of its ambience problem presented, as most of the spectators on the stand will watch from the sides of the screen , rather than in the central. So it demands a broad horizontal viewing angle. As far as the swimming pool displaying system is concerned, it is usually embedded within a high moisture and a relatively high temperature ambience. As such, it demands a fully concealed screen body itself.

As everybody knows , if there is any insufficiency in the gray scale of any large screen, it will result in a bad level effect and the softness of the image in question. This is especially true when the picture itself with a low luminance as the noise will inflict a bad quality picture to be seen, and this is one of the usual problems found by any Chinese manufacturers. The key of the issue lies in the insufficiency in the part of digital processing, with a relatively noise remnants and the linearity of the signal being processed, etc.

In view of this , Unilumin has engaged on a 3 in 1 SMD system, with a viewing angle of up to 120 degree both horizontally and vertically . As such, this will in turn guarantee the viewing uniformity of all audience.

So we are adopting on a maritime based approach in the finishing of our circuit packs and the screen body itself. We are applying glues over each of the circuit pack to guarantee it is water proofing to meet the IP56—66 standards.  So no moisture or corrosion of any kind can be inflicted.

Unilumin has adopted a 16 bit video processor, so it will lower as a result, its overall quantization noise embedded. This in turn guarantee a better brightness while retain the necessary gray scale required.